1000: 1 10A 50ohm 5mm Hole PCB Mounting Current Transformer

Model NO.: ZMCT103C
Insulating Medium: Epoxy Resin
Installation: PCB Mounting
Magnetic Circuit Structure: Combined Type
Voltage Transformation Principle: Capacitive Type
N.W: 5.75g
Inner Hole Size: 5mm
Turns Ratio: 1000:1
Trademark: zeming
Transport Package: Cartons
Specification: ISO9001, ISO14001, ROHS, CE, SGS
Origin: China
HS Code: 8504311000
ZMCT103C  Current Transformer
Small size,high accuracy,good consistency,for current and power measurement
 
Structural parameters:

1000: 1 10A 50ohm 5mm Hole PCB Mounting Current Transformer

Remarks: primary input: straight- through type( make the measured circuit be through the hole)
1,2pin :secondary output
                       Front view                                                    Bottom view
The main technical parameters:
model ZMCT103C
Rated input current 0-10A(50Ω)
turns ratio 1000:1
phase angle error ≤15'            
 (input 5A,sampling resistor 50Ω)
Current range 0~10A(sampling resistor 50Ω)
linearity ≤0.2%(5%dot~120%dot)
Permissible error -0.2%≤f≤+0.2%    
 (input 5A,sampling resistor50Ω)
isolation voltage 4500V
application Precise measurement of current and power
Encapsulation Epoxy
installation PCB mounting(Pin Length>3mm)
operating temperature -40ºC~+85ºC
Direction for use:
1000: 1 10A 50ohm 5mm Hole PCB Mounting Current Transformer
 Figure I                                     Figure II
         1. The typical usage of the product is for the active output (Figure I). R is a sampling resistor
2. The product can be directly through the resistance sampling, easy to use (Figure II).
 
 

Bushing Cover For Busbar

The busbar protection box is made of radiation crosslinked polyolefin material with excellent physical, chemical and electrical properties.

It is the insulation treatment material where the busbar is connected.

It is also suitable for 1KV/10KV/35KV voltage grade, with "I", "T", "L" and other shapes of protection boxes. It is widely used in electronics, communication, machinery, manufacturing and other fields.

The specific gravity is small (only 0.9-0.95) and the window rate is high.

It seems that the purchase price is high and the actual use cost is low.

It can provide insulation and enhancement for busbar connectors.And supply protection and insulation in switches and substations.

Features:

1.Suitable for 1-35KV.

2.Radiation cross linking materials (Polyolefin or EPDM rubber ).

3.Quick and easy installation.

4.Avoid short circuit and leakage.

5.Facilitate routine inspection and maintenance.

6.Resistant to moisture and dust.

7.Meet RoHS Stand.

8.Customized.

We are the professional manufacturer of Electrical Tapes,Insulating Tape and Bushing Cover in China for more than 25 years,if you want to know more information about our company and products, please visit our website



Bushing Cover For Busbar,High Voltage Busbar Connector,Busbar Insulator Material,Substation Switch Bushing Insulation Cover

CAS Applied Chemistry Materials Co.,Ltd. , https://www.casac1997.com