Reasons for communication errors when uploading programs from Mitsubishi plc
1. The communication port and baud rate of the Mitsubishi plc programming cable are set correctly. Such as: point serial port icon -> port RS232-> baud rate 9.6k / bps -> OK -> then point communication test, if the communication is successful, the hardware connection is no problem.
2. Is there a program written in Mitsubishi plc, or whether the PLC has been working properly?
3. Whether the program is encrypted or not, but there are few cases.
4. Is there any damage to Mitsubishi PLC?
Setting method of communication port of Mitsubishi PLC programming cable
1. Plug the programming cable into the USB port of the computer.
2, on the desktop, mouse over the "My Computer" icon, then click the right mouse button
3. In the pop-up menu, select "Device Manager"
4. Find your programming cable port number in the “Ports†list. Mouse over the port number, click the right mouse button, in the pop-up menu, select "Properties"
5. In the Properties window, you can modify the port number and change the port number to the same number. The port of the computer and the port of the Mitsubishi PLC programming software must be set. Under normal circumstances, the desktop computer defaults to COM1, and the software is also changed to COM1 and the software can be restarted. The USB port is often set and then reconnected. And restart the software, but sometimes it is the problem of the communication line, try to change the root, most of the time I bought three to meet a usable. If it doesn't work, it may be that the communication port is broken. It has been seen several times, caused by hot plugging, but it can still be used after the break.
The Brazilian plug is implemented in accordance with the Brazilian 14136:2002 manufacturing standard. The pins are three cylinders in an isosceles triangle shape. Standard electrical parameters: 10A and 20A. The Brazilian 14136 standard is based on the evolution of the international IEC 60906-1 standard reference. International standards are committed to formulating and encouraging countries to adopt global unified plug and socket standards. NBR14136 was released last time: In 2002, there were three different types of plugs used in Brazil. The first is that two blade plugs complying with NEMA 1-15 are used in North America and Japan. The second is that NEMA 5-15 with two parallel flat prongs and a round pin plug with grounding in the middle is also used in North America and Japan. Finally, European standard plugs can also be used throughout the European continent.
Brazil Power Plug,Inverter For Home Appliance,Brazil Power Outlet,Brazil Plug Type
Guangdong Kaihua Electric Appliance Co., Ltd. , https://www.kaihuacable.com