Washing machine attention! Small details save big trouble

1, the location of the determination of the washing machine should be placed close to the water source, power supply, sewage pipe closer to the faucet, power supply connection, to avoid the power cord is too long and soaked in water, destroy the insulation. At the same time, the location of the washing machine should be well ventilated, avoid direct sunlight, so as to avoid parts being oxidized and rusted, and the shell deteriorated.

2. Smoothly placed washing machine should be placed steadily. If the floor is uneven, it can be adjusted by adjusting the screw at the bottom corner of the case or by adding a solid gasket to avoid shaking or vibration when the machine is working. It can effectively avoid the noise and damage caused by shaking. machine parts.

3, electrical safety requirements in strict accordance with the requirements of the link ground, where the use of two-pin power plug must be a special ground for the washing machine and grounding well connected, and buried in the ground. The tenants of the building must not connect the ground wire to the return water pipe or the heating pipe, so as to avoid causing hidden troubles. For the three-hole socket, the upper hole in the middle is a ground wire, which is used exclusively for grounding and should be connected with the special ground wire of the washing machine.

4. The connection between the inlet and outlet pipes and the connection between the faucet connector and the washing machine inlet should be firm. Otherwise, when the water flow is too large or the water pressure is too high, the interface will be forcibly disengaged, which will not only waste water, but also cause the automatic washing machine to be in a water-free state. can not work normally. The drain pipe should be placed in a place convenient for operation or directly connected to the floor drain. The middle of the hose should not be bent and kinked to avoid poor drainage.