Features
*Fully sealed & waterproof, IP67
*Constant voltage output
*High efficiency up to 90%
*Short circuit and overload protection
*100% burn-in test
*2 years warranty
Applications
*LED module, strip, perforating lamp, pixel lamp, light bar, light box, wall washer, panel light, etc...
*Slim body, specially for application with narrow space, such as cove light, light box, channel letter...
Specification
| Model no. | LPS-12E150C |
| Input voltage | 170-250VAC 50/60 Hz |
| Max. power | 150 W max |
| Output type | Constant voltage |
| Dimming | No |
| Built-in active PFC | No |
| Warranty | 2 Years |
| Efficiency | 90% |
| AC inrush current(max.) | Cold start, 40A@230VAC |
| Output voltage | 12VDC ± 5% |
| Output current | 12.5A max |
| Overload protection | 105%Â hiccup mode, auto-recovery |
| Over voltage protection | 120% rated output voltage |
| Withstand voltage | I/P~O/P: 1.5kVAC, 1 minute |
| Operating temperature | -25~40 ºC |
| Installation | Outdoor waterproof |
| IP rating | IP 67 |
| Cooling | Free air convection |
| Certificates/standards | CE,BIS |
| Connection input/output | Input: 0.75mm² x 3 (18cm) / Output: 0.75mm² x 2 * 2 (18cm) |
| Dimensions(L*W*H) | 313 x 43 x 34 mm |
Pictures for Waterproof Power Supply
Successful Applications & Workshops & Exhibitions
Outdoor Waterproof 12V Slim LED Power Supply with CE, SAA, SASO, BIS certificateFeatures
*Fully sealed & waterproof, IP67
*Constant voltage output
*High efficiency up to 90%
*Short circuit and overload protection
*100% burn-in test
*2 years warranty
Applications
*LED module, strip, perforating lamp, pixel lamp, light bar, light box, wall washer, panel light, etc...
*Slim body, specially for application with narrow space, such as cove light, light box, channel letter...
Specification
| Model no. | LPS-12E150C |
| Input voltage | 170-250VAC 50/60 Hz |
| Max. power | 150 W max |
| Output type | Constant voltage |
| Dimming | No |
| Built-in active PFC | No |
| Warranty | 2 Years |
| Efficiency | 90% |
| AC inrush current(max.) | Cold start, 40A@230VAC |
| Output voltage | 12VDC ± 5% |
| Output current | 12.5A max |
| Overload protection | 105%Â hiccup mode, auto-recovery |
| Over voltage protection | 120% rated output voltage |
| Withstand voltage | I/P~O/P: 1.5kVAC, 1 minute |
| Operating temperature | -25~40 ºC |
| Installation | Outdoor waterproof |
| IP rating | IP 67 |
| Cooling | Free air convection |
| Certificates/standards | CE,BIS |
| Connection input/output | Input: 0.75mm² x 3 (18cm) / Output: 0.75mm² x 2 * 2 (18cm) |
| Dimensions(L*W*H) | 313 x 43 x 34 mm |
Pictures for Waterproof Power Supply
Successful Applications & Workshops & Exhibitions
OLED is organic light-emitting diode (D1de), which has the characteristics of self illumination, high brightness, wide viewing angle, high contrast, flexibility, low energy consumption and so on. Therefore, it has been widely concerned. As a new generation of display mode, it has gradually replaced the traditional liquid crystal display, and is widely used in mobile phone screen, computer display, full-color TV and so on. OLED display technology is different from traditional liquid crystal display technology. It does not need backlight. It uses very thin organic material coating and glass substrate. When there is current passing through, these organic materials will emit light. However, as organic materials are easy to react with water vapor or oxygen, OLED displays have high requirements for packaging.
Package Locating OLED Cover Glass,High Precision OLED Cover Glass,Special Desiccant Installed OLED Cover Glass
SHAOXING HUALI ELECTRONICS CO., LTD. , https://www.cnsxhuali.com