Fiber Optic Distribution Box is used as a termination point for the feeder cable to connect with drop cable in FTTx communication network system. The fiber splicing, splitting, distribution can be done in this box, and meanwhile it provides solid protection and management for the FTTx network building.
Features:
Total enclosed structure. Material: PC+ABS,wet-proof,water-proof,dust-proof,anti-aging, protection level up to IP65. Clamping for feeder cable and drop cable, fiber splicing, fixation, storage, distribution...etc all in one.  Distribution panel can be flipped up, feeder cable can be placed in a cup-joint way, easy for maintenance and installation. Cabinet can be installed by the way of wall-mounted or poled-mounted, suitable for both indoor and outdoor uses.
Specification:
1. Environmental requirement
Working temperature:-40ºC~+85ºC
Relative humidity:≤85%(+30ºC)
Atmospheric pressure:70KPa~106Kpa
2. Main technical datasheet
Insertion loss:≤0.2dB
UPC return loss:≥50dB
APC return loss:≥60dB
Life of insertion and extraction:>1000 times
3. Thunder-proof technical datasheet
The grounding device is isolated with the cabinet, isolation resistance is less than2MΩ/500V(DC);
IR≥2MΩ/500V
The withstand voltage between grounding device and cabinet is no less than 3000V(DC)/min, no puncture,no flashover.
U≥3000V
Configuration table:
Table 1 Model and configuration
| Model | Description | Size(Pic 1) | Max Capacity | Installation Size(Pic 2) | |
| A*B*C(mm) | Splitter | Splice | A*B(mm) | ||
| FTKS-1805-24A | Distribution Box | 320*240*100 | 24 | 24 | 190*298 |
Dear friend
If you have any questions about Fiber Optic Distribution Box or other products,please don't hesitate to contact meÂ
My Name: Eva LinÂ
Telephone: 86-755-2810 6528
Whataspp/Mobile phone: +86-13631149941 Waterproof 16/24 Core FTTH Inserted Type Fiber Optic Distribution Box
Fiber Optic Distribution Box is used as a termination point for the feeder cable to connect with drop cable in FTTx communication network system. The fiber splicing, splitting, distribution can be done in this box, and meanwhile it provides solid protection and management for the FTTx network building.
Features:
Total enclosed structure. Material: PC+ABS,wet-proof,water-proof,dust-proof,anti-aging, protection level up to IP65. Clamping for feeder cable and drop cable, fiber splicing, fixation, storage, distribution...etc all in one.  Distribution panel can be flipped up, feeder cable can be placed in a cup-joint way, easy for maintenance and installation. Cabinet can be installed by the way of wall-mounted or poled-mounted, suitable for both indoor and outdoor uses.
Specification:
1. Environmental requirement
Working temperature:-40ºC~+85ºC
Relative humidity:≤85%(+30ºC)
Atmospheric pressure:70KPa~106Kpa
2. Main technical datasheet
Insertion loss:≤0.2dB
UPC return loss:≥50dB
APC return loss:≥60dB
Life of insertion and extraction:>1000 times
3. Thunder-proof technical datasheet
The grounding device is isolated with the cabinet, isolation resistance is less than2MΩ/500V(DC);
IR≥2MΩ/500V
The withstand voltage between grounding device and cabinet is no less than 3000V(DC)/min, no puncture,no flashover.
U≥3000V
Configuration table:
Table 1 Model and configuration
| Model | Description | Size(Pic 1) | Max Capacity | Installation Size(Pic 2) | |
| A*B*C(mm) | Splitter | Splice | A*B(mm) | ||
| FTKS-1805-24A | Distribution Box | 320*240*100 | 24 | 24 | 190*298 |
Dear friend
If you have any questions about Fiber Optic Distribution Box or other products,please don't hesitate to contact meÂ
My Name: Eva LinÂ
Telephone: 86-755-2810 6528
Whataspp/Mobile phone: +86-13631149941
Antenk latach connector DIN 41651,Those products are used in more or less every known application within computer-, industrial-, telecommunication and specific automotive markets. This product technology allows cost effective connections between printed circuit boards based on removable or permanent connections based on a longterm proofed way of assembly. latch header connectors are available with the traditionally used pitch of 2.54mm and the pitch of 2.00mm,1.27mm.
Antenk Box header/Ejector header Description and Application:
Box header/ ejector header connector, With DIP straight/vertical, SMT,Right angle, 2.54pitch, 2.0pitch, 1.27pitch,
The commonly used Pin ways have 6P,8P,10P,14P,16P,20P, 24P,26P,30P,34P, 40P,50P,64P.
Box header/ ejector header and IDC Flat Cable connectors are two of the most commonly used connectors. Box headers can be found in nearly all electronic equipments.
This is a IDC product which allows cost effective connections between circuit boards based on permanent connection (using transition connector) or removable connection
(Using for IDC flat cable connectors).
Box header
Ejector header
Pcb Header,Latch Header Connector,Ejector Header,Latch Ejector Connector,Box Header Connector With Latch ,Box Header Lock Type Connector
ShenZhen Antenk Electronics Co,Ltd , https://www.atkconnectors.com