What is the working principle of intelligent lighting control system?

Traditional lighting systems use manual or timed control modes, which are not only inefficient but also cause energy waste. The application of intelligent lighting systems has greatly improved these problems. So what is the working principle of intelligent lighting control system? Xiao Bian is introduced in the following.

Intelligent lighting control system principle

Remote-controlled lighting: remote-controlled lighting is a simple and convenient way to control lighting equipment through radio signals. With the maturity of technology, digital wireless remote control technology has replaced the traditional mechanical manual switch, gradually becoming the trend sought after by modern people. Remote control switches generally use wireless digital identification technology. Each switch works independently and does not interfere with each other. Some people may worry that the direction of the remote control is too difficult to identify and may affect receiver sensing. In fact, this worry is not necessary. Because the wireless RF remote control has no direction, the signal can pass through the wall and there is no radiation. The buttons can be controlled at any corner of the room. Some people think that changing the switch seems to be too cumbersome, but the actual operation is very simple, the installation of the switch and the lamp can be simply connected, will not destroy the overall decoration layout of the room.

Inductive lighting: The human body sensor is also called infrared sensor. The human body has a constant body temperature, generally around 37 degrees, so it will emit infrared light of a specific wavelength. The human body senses the illumination by capturing this specific wavelength of infrared light to control the light of.

Unlike the remote control switch, which controls the lamp at any time by pressing a key, the most important characteristic of the infrared human body sensor switch is delayed illumination. Because the human body cannot always stand in front of the switch to keep the luminaire lit, once it leaves the infrared sensing range, it cannot turn off the light immediately. How do you extinguish it after turning on the luminaire? This requires delayed lighting to control the lighting time. In the delay time period, if someone is active in the effective sensing range, the switch will continue to be turned on. After the person leaves, the delay will automatically turn off the load and realize the intelligent control function of “people light, people go light out”.

Touch lighting: touch devices usually have built-in touch-sensing chips. The current mainstream technology of touch-sensing panels uses capacitive sensing technology, which brings capacitance changes through finger touch to control switches or lamps.

The above content is the control principle of the intelligent lighting system. The intelligent lighting system can monitor and track the power supply in real time, automatically and smoothly adjust the voltage and current amplitude of the circuit, and improve the extra power consumption caused by the unbalanced load in the lighting circuit. Power factor, lighting control system that reduces the operating temperature of lamps and lines and achieves the purpose of optimizing power supply.

related suggestion:

Article: Intelligent Lighting Development Trends How Intelligent Lighting Markets Face Problems

Recommended: Jiubang smart lock easy smart home smart home lock lock