Sharing method of various brand projectors - Home Appliances

Single chip microcomputer STM32L151CCU6

Manufacturers produce direct sales LED lamp bead patch lighting products 0805 white light super bright indicator light dedicated

0805 blue light factory direct sales

MOS power IC full range

Zeroing method for various brand projectors
1. Panasonic (Panasonic) The method of clearing the projector first press “MENU” to find the lamp usage time, then press “ENTER” for three seconds. After “POWER OFF” appears, turn off the power and restart OK!
2, Hitachi (Hitachi) projector clear method boot, press RESET for 3 seconds, the time dialogue appears, select 0 is OK
3, SONY (Sony) projector clear method
RESES+Left+Right+OK (for most models of Sony)
4, NEC (Japan) projector clear method
When the 830/840/850/440 series time is up, two indicators will be on, including the LAMP indicator. The method of clearing is to press the remote control OFF for 20 seconds in standby mode. There is a headphone jack at the bottom of the remote control. It can be connected to the remote control input of the projector, so it will be convenient to clear it;
5, 3M projector clear method Under the boot, press RESET for 3 seconds, there will be a dialogue with time, choose 0! Mitsubishi (Mitsubishi) projector clear method in standby press left + right + power
6. Epson (Epson) The projector clearing method is only applicable to machines with resistance at the lamp holder: there is a small resistance (clearing) at the lamp holder, as long as the corresponding 4 small pins in the machine are short-circuited. This will be annoying, and if the short circuit is not good, it may burn the motherboard;
7. Toshiba (Toshiba) The projector clear method is not connected to the power supply, press the power + menu + OK + input, press and hold the power supply for 3 seconds, apply to all the machines before 780;
8, Philips (Philips) projector clear method boot, select the bulb time bar in the menu, press the OK button on the projector for 3 seconds
9, SANYO (Sanyo), EIKI (Aiqi), Canon (Canon) projector clearing methods are all in the menu, there is LAMP typeface, all YES;
10, PLUS (Procter) projector clearing method for models: PLUSU2-811/U2-815/U2-815C/U2-1110/U2-1130/U2-X1130C/U2-1150. Within 1100 hours Clear: When the menu is selected, press ON on the remote control (about 8 seconds); after 1100 hours, if it cannot be turned on, directly press ON on the remote control (about 25 seconds).
Applicable models: PLUS U3-810SFC/U3-1080SFC/U3-810WZC/U3-1080WZ
C/U2-X200UC/4-161/U4-121/V-1080C/V-807C/V-1100C/U2-850/U2-1
500/U2-850W/U2-1500W/U5-121/U5-162. The lamp timer is cleared in the menu.
11, INFOCUS (InFocus), ASK (American vote God), Proxima (Bao Shima), IBM projector clear method is generally clear in the menu. InFocus 500/530 is powered on, press menu + volume minus 3 seconds, then open the menu to see if there is any clear, if not, you can try several times; IBM is INFOCUS foundry, refer to INFOCUS/
12, SHARP (Sharp) projector clear method Sharp video machine (PN200/300/500/C10, etc.) bulb time is cleared, press and hold "volume minus" + "select down" under standby, then boot; Sharp 100S/00X /200/220, etc., the projector bulb clearing method, press and hold -, +, AUTOSYNC three keys in standby, and then turn on;
Note: The machine coming out of the SHARP (new in 2004) should not be arbitrarily cleared. If the zero is cleared, the lamp should be replaced. Otherwise, the lamp will be scrapped in about 200 hours.